Actidata actiNAS cube RDX Guide d'installation télécharger pdf (Page 2)

Part 1: Preparing the NAS

i. Connect the power cord to the AC Power Input Socket.

ii. Connect network cable to LAN0 port.

iii. Press the Power On/Off Switch the front panel to power the NAS. Wait for at least 3 minutes for the

system to start up.

Note: The current IP address of LAN0 (eth0) is displayed in the LCD display panel. If a DHCP server is

available, a DHCP IP will be assigned to eth0. If not, eth0 will use the default IP address 172.16.0.1 subnet

mask 255.255.0.0.

Note: If a DHCP server is available, skip Part 1.1 and proceed to Part 2.

If a remote computer is able to connect to IP address 172.16.0.1 (after making necessary changes in

network setting of remote computer), skip Part 1.1 and proceed to Part 2.

1 2 3 4 5 6 7 ... 12 13

Pas de commentaire

Actidata actiNAS cube RDX Guide d'installation Page 2